Friday, September 28, 2012

Format Penta Tpad IS701R or Installing OS Penta Tpad IS701R

The BSNL Penta TPAD IS701R is a powerful tablet solution at an unbelievably affordable price you may never have dreamt of! Its comes with Android OS and high resolution 7” resistive touch screen powered by a nice processor and inbuilt DDR II 256M RAM It is best price performance tablet in their price range. You have all the controls in a single finger touch mode. Browse web on wireless or enjoy media playback on Penta TPAD IS701R. Its support 32GB memory on external memory card slot.
If you have following problems with your BSNL Penta IS701R Tab:
  • Wi-Fi not working
  • Wi-Fi switching off and on its own
  • Battery status not accurate
  • Memory card not read by the device
  • Device internal memory shows zero bytes
  • BSNL and Penta logo appears and nothing happens (Device Hanging)
  • Device stuck on Android logo
  • Tablet not taking touch inputs correctly
  • Forgot password
It could be resolved easily. Simply follow the instructions given below:
1. System Requirement: The computer must be installed with Windows XP. Remove all USB disks & make sure the tablet power is sufficient.

2. Download Software: The software and OS files which you will be using during the upgrade.
Click here to download the software and OS files for IS701R with HDMI
Click here to download the software and OS files for IS701R without HDMI



3. Extract Folder: After extracting  zip file you will find two sub-folders “File 1” and “File 2”

4. File 1: Now open “File 1” folder. Click on IUWI.2 A new window will Open.

5. Insert Micro SD Card: Insert a micro SD card in a card reader and attach it to the system. Please make sure no other USB Disk’s (like pen drive, printer etc.) is attached to the system while following these instructions.

6. Select Image Files of OS: In the window which you have got in the Step 4 where it says “Choose a wrapped image“ browse and open “File 2” and Select file “F117_android_1310721.ius”

7. Check for the Micro SD Card: If you have inserted a Micro SD Card. In the same window select your Micro SD Card “Choose an SD Drive”

8. Burn files to Micro SD Card: Then select “Boot Disk” from left pane and click on “Burn” at the bottom right.

9. Process Complete: When the process is complete, you will not see any File/Folder on the Micro SD Card. However the file is there. Next, remove the Micro SD Card.


10. Insert the Micro SD Card into the T-PAD: Now press the Power Button. The process will start automatically.
  • Now Device will boot from SD card.
  • Press the Back button which is located just below the camera at the right side.
  • Follow the on screen instructions.
  • A notification will appear & then Remove the Micro SD Card.
  • The BSNL IS701R Android system will Reboot.
  • Follow on screen instructions to Calibrate the touch screen.
Yeah, Software Upgradation is completed. You have done it. If you have any query post it.

52 comments:

  1. Hi i tried your steps properly but when i start the tablet it boots from sd and throws the error - Update package is damaged . Please let me know what i should do now

    ReplyDelete
    Replies
    1. Dear Shanmanton You have done some thing mistake because i tried these steps my self and secondly This error Update package is damaged comes after formatting the card or memory stick. So Please try once more time and if problem persist please call me on my No. 9958917184

      Delete
    2. i tried it several times but still the same problem persists

      Delete
  2. dude if this one works....thn u rock...

    ReplyDelete
  3. m unable to choose an sd drive ....i have just bought a new sd card n inserted in card reader n attached to my lap...it shows in my computer that the card has been attached....but not in d iuw file..wht m i supposed to do now? help on this asap...

    ReplyDelete
    Replies
    1. Dear Sheetal,

      I have been tried these my self if you still not able to work with it. Let me know on my email id: deependra_it@hotmail.com or call me on my no. 9958917184. Or share your number on my email id with all the reference.

      Regards,
      Deependra Singh

      Delete
    2. Hi Sheetal, if ur card is not getting detected follow these steps
      1. format the card.
      2. try it on windows xp on a desktop pc
      3. disable any firewall
      4. try different ports .
      5. try different sd card
      if non are working, email me @ vinayakpra@aol.com

      Delete
  4. It works.
    Your method solved my problem. (Tab was continuous restarting)
    (first when I tried to make a boot disc in Windows 7 it was giving me same error 'Update package is damaged' , but in XP it worked perfectly.)
    Thank you for the method.

    ReplyDelete
    Replies
    1. My Pleasure..........I am just sharing my information with you guys. If you have any information that will be helpful in using the tab. Send it to me and i will publish it here with your name. My email ID is deependra_it@hotmail.com

      Delete
  5. is this method works with xp only because i m having vista and not able to locate any sd device on iuw software but still in my computer it is there

    ReplyDelete
  6. sir my tab is continuously booting.pressed the back button and power button together and got the message "no recovery image found,try boot from sd card"..contacted pantel and they send me a link.downloaded it and did like u said above and still it shows "no recovery image found,try boot from sd card"..pls help me sir
    mail id: vivek1994surabhi@gmail.com

    ReplyDelete
  7. Hi Deependra,

    I have a T-Pad 701R. It works fine except that its T-Flash card reader does not read the files in SD Card (16 GB).
    I tried and followed all the steps mentioned here exactly and was able to re-installed the OS.
    But even after that, its still not reading memory card.

    I created the OS image in 2 GB SD card. While installing, it read the OS image through TF slot only. So not sure why it does not read the memory card in normal condition.

    Can you please point out what could be wrong there.
    Any help in this regard would be highly appreciated.

    Thanks,
    Deepak

    ReplyDelete
    Replies
    1. Dear Deepak,

      Penta is showing that memory card is supported upto 32 GB but in reality it only reads a memory size upto 8 GB properly. So i would recommend you that please check with 8 GB memory card if problem persist please let me know. Then i will check for solution.

      Regards,
      Deependra

      Delete
  8. HI
    My model is BSNL PENTA IS701R
    Previously when I had a problem with my tablet ,I formatted that following the above instructions.It's PERFECT!!
    Now I had same problem and now when I am inserting the SD card with OS on it tablet is not detecting it.Will it works only once .Help me on this.

    ReplyDelete
  9. I have made SD card as describe as above. when i insert it and try to recover os, it give message no image find, try from SD. and its getting hang up, please advise what to do

    ReplyDelete
    Replies
    1. Shailesh are you using win xp or other window because these steps are for win xp only please reply so I can give you resolution

      Delete
    2. Shailesh are you using win xp or other window because these steps are for win xp only please reply so I can give you resolution

      Delete
    3. Deependraji, thanks for reply, i used xp for making SD bootable. is there any suitable OS for this tablet ? I have one more tablet, it is china make and I have successfully updated it with uberoid version. First I tried same version for this bsnl tablet but not getting success. Please advise what to do ? Regards

      Delete
    4. Dear shailesh, I think u r doing some mistakes otherwise it would have been fixed because I have checked these steps n those r working. And I don't thinkthat there is any other is compatible for this device any ways if u have problem then call me after 10pm on my no. 9958917184 and install team viewer so that I can check the process. Please let me know if it is okay for u

      Delete
    5. Deependraji, i have one more tablet of same series, and it has same problem. Once i have done restore pressing HOME + POWER ON KEY + HOME KEY again and I got restores massage also but after rebooting of tablet result is same. May I will call you tomorrow.

      Delete
  10. Please also suggest any other version of android can we load it in BSNL tablet ?

    ReplyDelete
    Replies
    1. There is no other is for tablet. And you can call me today

      Delete
  11. Dear sir,
    I have successfully completed all the steps given above . My Panta is701r is now working.
    MY problem is previously i am able to play angry bird, angry bird RIO game in panta but after doing this process i am not able to play this games. When ever i select the game it comes to menu screen. nothing happen. Please help me regarding this.

    ReplyDelete
    Replies
    1. Dear Dipesh,

      There is nothing like this please reinstall the Angry bird and try again if problem persist please reset your penta tablet again and then work with it.

      Regards,

      Deependra

      Delete
    2. how can i reset?
      if i repeat above steps that will work for me or not?

      Delete
  12. This comment has been removed by the author.

    ReplyDelete
  13. Dear sir i have Bsnl penta is701c when m charging the tab the screen will be blurr and fluctuate and the colour of display will be dim amd line shows . after removal the charger every thing is fine and plz tell is this os file is also best for is701c penta tab.

    ReplyDelete
  14. Hi! I would first of all thank you very much, you saved me man! Thanks a lot. And also i would like to tell few things which might help above people who were not able to boot.
    This software works in Win 7, because i did in that only.
    Your memory card should be password free. Sometime new memort card also gets locked, in my first three attempt i was not able to do because my mc was locked by my phone.
    After burning, insert memory card, and press both button before switiching on the tab, that is when you insert memory card, press the back button and power button together, it will start a timer and press back button again, and you are done. It took me five attempts to figure this out. LOL
    THANKS AGAIN BUDDY, IT HELPED AND SAVED MY TAB
    Regards
    www.feltcreations.blogspot.com

    ReplyDelete
  15. the above process is ok. but i am getting touch crosshair to calibrate.
    even i touch it.it won't work

    ReplyDelete
  16. Worked once...but i am having same problem now and this process is not working ,,,,,,,tab bears a message saying "recovery image not found,boot from sd card" And then nothing works or happens..............

    ReplyDelete
    Replies
    1. Same problem... "No recovery image is found, try recover from SD".

      Delete
    2. yeah same problem ....."" no recovery image is found, try recover from sd."" followed all steps properly...

      Delete
  17. Please can u give a process for installing another rom or 0s version..................

    ReplyDelete
  18. Dear Sir, I have BSNL Penta IS701R. I have tried to reinstall the software through windows XP. and still not able to successfully install the same. Again the message is coming as 'Update package is damaged'. I hv tried many times but no success so far. Please help me out.

    Regards.....Vinod

    ReplyDelete
  19. Dear Sir,
    My SD card just slipped inside the tablet when I tried to enter it into the T flash.. What should I do? Asap pls!!

    ReplyDelete
  20. sir plese inside image to work, step by step work in software image post me (how to work plese post image sent me my email)

    ReplyDelete
  21. yeah same problem ....."" no recovery image is found, try recover from sd."" followed all steps properly...

    please suggest the solution for the above problem

    ReplyDelete
  22. Hi Friend,

    Thanks for simple steps, it is working well on my PENTA IS701R without any hitch.

    ReplyDelete
  23. Hi,
    my tablet screen is blinking when it is fully started so that i cant perform any steps and i also tried your steps but its still blinking what should i do please help me

    ReplyDelete
  24. This comment has been removed by the author.

    ReplyDelete
  25. i a have this a million times in my tab with all makes of sd-cards but the the message update package is demaged flashes .

    ReplyDelete
  26. first your sd card format in computer next same step use

    ReplyDelete
  27. update pack is damaged showing what an i do

    ReplyDelete
  28. i want flash file please give me

    sultan082@yahoo.com send me please ....

    ReplyDelete
  29. File ka link update karo yaar not found aa harahai

    ReplyDelete
  30. Can i download and burn the software to sd card in Windows 7 laptop

    ReplyDelete
  31. Logo stable no further action how to solve hard reset not happening asks for external booting

    ReplyDelete